The principle of reasonable selection of cutting amount: during rough machining, the main task is to improve labor productivity, and the larger cutting amount is selected; during semi-finishing and finishing, the smaller cutting amount is selected to ensure the processing quality of the workpiece.

Our carbide inserts could to be processed Alloy steel, Tool steel, carbon steel, stainless steel, Cast iron and Titanium alloy. Working material as following:

Higher cutting resistance, Notch wear on flank, Poor roughness of surface, or deterioration of accuracy. Soft grades, Excessive cutting speed, Small flank angle,Low feed. Select a higher, wear-resistant grade, Reduce cutting speed, Increase flank angle, Increase feed.

Carbide inserts are mainly divided into turning inserts, milling inserts, groove inserts, thread insert and aluminum inserts. Different types of inserts correspond to different processing, and the most suitable processing insert can be selected according to their own processing needs.

Cemented carbide has a series of excellent properties such as high hardness, wear resistance, good strength and toughness, heat resistance and corrosion resistance, especially its high hardness and wear resistance, which are basically unchanged even at 500 ° C, and still have a high hardness at 1000 ° C.

The tungsten carbide insert is made of cemented carbide. The cemented carbide is an alloy material made of hard compound of refractory metal and bonded metal through powder metallurgy process.

B. Milling inserts: It is a rotating tool with one or more cutter teeth used for milling, mainly used for machining plane, step, groove, forming surface and cutting workpiece on the milling machine.